Thursday, September 23, 2010

Valley danmned reservoir

A dam constructed in a valley relies on the natural topography to provide most of the basin of the reservoir. Dams are typically located at a narrow part of a valley downstream of a natural basin. The valley sides act as natural walls with the dam located at the narrowest practical point to provide strength and the lowest practical cost of construction. In many reservoir construction projects people have to be moved and re-housed, historical artefacts moved or rare environments relocated. Examples include the temples of Abu Simbel[2] ( which were moved before the construction of the Aswan Dam to create Lake Nasser from the Nile in Egypt ) and the re-location of the village of Capel Celyn during the construction of Llyn Celyn[3].

Construction of a reservoir in a valley will usually necessitate the diversion of the river during part of the build often through a temporary tunnel or by-pass channel [4].

In hilly regions reservoirs are often constructed by enlarging existing lakes. Sometimes in such reservoirs the new top water level exceeds the watershed height on one or more of the feeder streams such as at Llyn Clywedog in Mid Wales[5]. In such cases additional side dams are required to contain the reservoir.

Where the topography is poorly suited to a single large reservoir, a number of smaller reservoirs may be constructed in a chain such as in the River Taff valley where the three reservoirs Llwyn-on Reservoir, Cantref Reservoir and Beacons Reservoir form a chain up the valley.[6]